+91 22 4127 2323

Concrete Protection  Icon

bar

admixture

bar

SS - ConGuard Primer

Specially Formulated Primer for Absorbent Surfaces, to be used with Protective Coating Systems

  • Specially Formulated, ready-to-use, primer for use with acrylic and mineral based protective coating systems, especially Anti- Carbonation Coating systems such as SS -ProtectoCon AC and SS - ProtectoCon W.
  • Quick Drying system, excellent penetration and adhesion to absorbent substrates, safely seals substrates and promotes adhesion of protective coating systems.
  • Chloride free, non corrosive.

Consumption : ~ 0.075 to 0.100 kg / m2

Form and Packaging : Liquid; 30 kg

SS - ProtectoCon AC

Elastomeric, Breathable, Crack-Bridging, UV Resistant, Waterproof, Anti-Carbonation Coating

  • Specially Formulated Anti-Carbonation Coating System for new or distressed surfaces, combining properties such as water-tightness, crack bridging, UV Resistance, breathability and Chloride and CO2 resistance, in a highly elastomeric coating.
  • Quick drying system, protects concrete from pollution, weathering, water, chlorides, UV and carbonation for extended service life.
  • Reduces Biological growths, moss, fungus etc. and can be pigmented to required colours, conforms to IRC SP 80 and MORTH Specs.
  • Chloride free, non corrosive.

Consumption : ~ 0.3 to 0.6 kg / m2 depending on substrate

Form and Packaging : Paste; 25 kg

SS - ProtectoCon WB

Elastomeric, Breathable, Crack-Bridging, UV Resistant, Waterproof, Anti-Carbonation Coating

  • Specially Formulated Anti-Carbonation Coating System for new RCC surfaces, combining properties such as water-tightness, crack bridging, UV Resistance, breathability and Chloride and CO2 resistance, in a highly elastomeric coating.
  • Quick drying system, protects concrete from pollution, weathering, water, chlorides, UV and carbonation for extended service life.
  • Reduces Biological growths, moss, fungus etc. and can be pigmented to required colours, lower solids than SS - ProtectoCon AC.
  • Chloride free, non corrosive.

Consumption : ~ 0.3 to 0.6 kg / m2 depending on substrate

Form and Packaging : Paste; 25 kg

SS - ProtectoCon SB

Solvent Based, Breathable, Crack-Bridging, UV Resistant, Waterproof, Anti-Carbonation Coating

  • Specially Formulated, solvent based Anti-Carbonation Coating System for new RCC surfaces, combining properties such as watertightness, crack bridging, UV Resistance, breathability and Chloride and CO2 resistance.
  • Quick drying system, protects concrete from pollution, weathering, water, chlorides, UV and carbonation for extended service life.
  • Reduces Biological growths, moss, fungus etc. and can be pigmented to required colours, lower solids than SS - ProtectoCon AC.
  • Chloride free, non corrosive.

Consumption : ~ 0.3 to 0.6 kg / m2 depending on substrate

Form and Packaging : Paste; 25 kg

SS - Tri SewCoat

Ceramic Based Lining Mortar having extreme pH resistance for Sewage and Potable Water Structures

  • Specially Formulated, cementitious, one component, shrinkage and crack resistant, Ceramic Based, Mineral Lining Mortar, used for protection of sewage structures (STPs, Manholes, Storm Water Drains, etc.) or Potable Water Structures (Dams, tanks, etc.).
  • Excellent breathability, early strength development, quick setting, impermeability and bonding.
  • Resistant to extreme abrasion and pH between 3 to 14, protects against Biogenic Sulphuric Acid Corrosion in sewer structures.
  • Chloride free, non corrosive.

Consumption : ~ 1.8 kg / m2 / mm thickness

Form and Packaging : Powder; 30 kg

SS - JointFix PIFC

Low Porosity, Abrasion Resistant, Polymer Modified, Iron-free, Fibre-reinforced Ceramic Fortified Mortar

  • Specially Formulated, cementitious, one component, shrinkage and crack resistant, Ceramic Based, Mineral Lining Mortar, specially formulated for thick coatings and filling and pointing masonry and other joints in aggressive environments. Used in Dam Spillways.
  • Excellent breathability, early strength development, quick setting, impermeability and bonding.
  • Resistant to extreme abrasion and pH between 3 to 14, protects against Biogenic Sulphuric Acid Corrosion in sewer structures.
  • Chloride free, non corrosive.

Consumption : ~ 1.8 kg / m2 / mm thickness

Form and Packaging : Powder; 30 kg

SS - ThermoCoat

Ceramic Based, Thermal Barrier, Insulation Coating for Metal and Mineral Surfaces

  • Specially Formulated, one component, Thermal Barrier Coating incorporating hollow Ceramic Microspheres in an acrylic base.
  • Can replace traditional insulation systems, heat reduction greater than 20%, UV and IR Resistant.
  • Prevents corrosion under insulation, can be walked on, and applied to virtually any substrate.
  • Can be used for industrial roofs, walls as well as hot piping systems (safe touch surfaces).
  • Easy to apply, Paint-Like application.

Consumption : ~ 1.0 L / m2

Form and Packaging : Paste; 20 kg

SS - ProtectoCon CT

Coal-Tar Epoxy Based Chemically Resistant Protective Lining for Concrete in Aggressive Conditions

  • Specially Formulated, solvent based Coaltar Epoxy Coating System for new RCC surfaces, combining properties such as watertightness, crack bridging, Chloride and CO2 resistance, Chemical resistance and Extreme Protection.
  • Quick drying system, protects concrete chemical attack and water for extended service life.
  • Reduces Biological growths, moss, fungus etc.
  • Chloride free, non corrosive.

Consumption : ~ 0.3 to 0.6 kg / m2 depending on substrate

Form and Packaging : Paste; 25 kg

Registered Office

  • A - F 1, First Floor, Magnum Plaza, Zarina
    Towers II, St. Inez, Panaji - 403001, Goa
  • info@ssbuildchem.com
  • +91 22 4127 2323

Mumbai Office

  • 302 - 304 Vardhaman Chambers,
    A - Wing, Sector 17, Vashi,
    Navi Mumbai - 400 703, Maharashtra
  • info@ssbuildchem.com
  • +91 22 4127 2323

© 2017 Assess Build Chem Pvt. Ltd. | Website Design & Hosted by SYSMIC.